PRODUCT VIEW
CAE Shifter suitable for Hyundai i30N
CAE Shifter suitable for Hyundai i30N
Expected delivery time: 7-14 working days
Product documents
Installation instructions
957,00 € - 1.057,00 €
incl. VAT plus shipping costs
Additional information
| Vehicle manufacturer | |
|---|---|
| Vehicle type | I30N Facelift, I30N Fastback, I30N Fastback Facelift, I30N Fastback Pre-Facelift, I30N Pre-Facelift |
| Surface | Aluminium uncoated, anodized black |
Product information
"Our part has to work and have a technical advantage in addition to its appearance, otherwise we won't build it." - Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
CAE Shifter suitable for Hyundai i30N
- Short and super-precise gearshift travel H-switched
- Optimum ergonomics with the Focus Motorsport: perfect positioning of the gearshift close to the steering wheel. The H-shift pattern is within approx. 75 x75 mm.
- Reverse gear release via cable pull from the gearshift. Accidental engagement of R gear is impossible. Reverse gear is unlocked by pulling up the sliding sleeve on the gearshift.
- Geringes Gewicht und hohe Stabilität: Die Fräs- und Drehteile bestehen aus 7075er Aluminium, die Unterkonstruktionen aus lasergeschnittenem, 3 mm starkem Aluminiumblech AlMg3. Die Teile werden im WIG-Schweißverfahren zusammengefügt und für ein optimales Finish blank gebürstet.
- Smooth gear changes under load or when cornering.
- Integrated center position spring for perfect feedback when changing gears during upshifting and downshifting.
- Right/left stops and reverse gear stop can be set separately.
- Simple installation thanks to complete conversion kit, supplied with all small parts and fixing materials. Download installation instructions here
- Shifter is intended for vehicles with interior fittings or center console and uses the mounting points of the original gearshift.
- Surface of the shifter and gear knob available in various finishes; and as an accessory covered with grey Alcantara with colored X-stitching
| Total height above ground: | approx. 485 mm |
| Total length overall: | approx. 300 mm |
| Base plate dimensions: | approx. 145 x 300 mm |
| Switching travel: | approx. 75 mm |
| Dialing path (cross direction): | approx. 75 mm |
| Weight (complete): | approx. 1.35 kg |
| Offset of the gear knob (rear / top): | approx. 0 / 145 mm |
Die Schaltseile werden ohne Änderungen übernommen, die Mittelkonsole muss nur minimal bearbeitet werden. MK Abdeckrahmen und das Ablagefach müssen leicht modifiziert werden ( siehe Bilder )
Scope of delivery:
- Shifter fully assembled, all small parts and fasteners; center console cover plate (ALU)
Suitable for the following vehicles:
- Hyundai i30N
ACHTUNG Auch für diesen CAE Ultra Shifter ist ein TEILEGUTACHTEN verfügbar. Die Eintragung in die Fahrzeugpapiere für die Verwendung im Bereich der STVZO ist somit PROBLEMLOS nach §19/3 möglich. Wenn Sie für Ihren Shifter ein Gutachten wünschen, kontaktieren sie uns bitte parallel zum Kauf Bei diesen Teilen handelt es sich um Motorsport Produkte, welche nicht ohne Weiteres nach StVO zugelassen sind. Eine Einzelabnahme nach §21 durch den TÜV ist hierfür notwendig. Wir weisen explizit darauf hin, dass keines unserer zum Verkauf angebotenen Produkte, originale Fahrzeugteile der Fahrzeughersteller BMW AG, M GmbH, MINI, VAG oder von sonstigen Fahrzeughersteller sind. Das Benennen der Fahrzeug Marken und Modelle dient lediglich der Produktfindung und deren Zuordnung zum passenden Fahrzeugtyp.
Expected delivery time: 7-14 working days
Product documents
Installation instructions
General FAQs
Are you missing parts that are supposed to be present according to the delivery bill?
1. write us an email to lager@speedengineering.de with the following content: first name, last name - order number - missing item number.
We will contact you immediately for a free reshipment.
2. use our chat at the defined times and communicate the same data as in the email.
The package has not arrived within the specified delivery time?
In most cases, you will receive a notification from the shipping service provider after the status of your order has changed, including a tracking number. You can use this tracking number to track your parcel and contact the service provider. Please note that the status "Shipment is ready for collection or has been announced" only indicates that your parcel is ready for collection by the parcel service provider and is NOT yet on its way. This message can often persist over weekends or after 5 p.m. until the next working day. In this case, it is not necessary to contact us as the parcel is not yet on its way.
Can I have products installed?
Yes, all products where this is possible have the sub-item
"Castrop-Rauxel workshop - installation fee 0.5 hours"
Click on it and the additional price will be displayed directly. Place the main item in the shopping cart, complete the purchase and you have already booked the installation. We will contact you by email within the next 48 hours to arrange an appointment for installation. Don't worry, your parts will not be shipped in this case unless you want them to be.
Where can I find the installation instructions?
As a rule, you will find all available installation instructions in written form after purchase in a download link which is only valid for you. But beware, not all products have written installation instructions. We are constantly working on providing these for all products, but unfortunately this step is very time-consuming and takes time.
If you get stuck, please send an email to info@speedengineering with the following data in the subject line:
First name, last name - Order number - Request for installation instructions
Or use our chat. They will also be able to help you there.
Last but not least, many video instructions are available at:
https://www.youtube.com/@-manuals-speedengineering4200
Where can I find my parts certificate or material certificate?
Parts certificates or material certificates are only provided after the purchase has been completed. Either by download link or by email. Unfortunately, these documents cannot be sent in advance.
Partial appraisals will of course be sent with your package in physical form, if applicable.
I have a defective part?
You have already bought products from us and they are worn out or have been affected by other circumstances? No problem, we adhere to all legal requirements of warranty and guarantee claims and beyond.
Please send us an e-mail to order@speedengineering.de with the following details:
Name, surname - Order number - Item number which appears to be defective - Image file of the item (if possible)
We will get back to you within 48 hours to solve the problem.
powered by