ST XTA PLUS 3 coilover suspension with support bearing suitable for Nissan 350Z

ST XTA plus 3 TAPPER

The ST XTA plus 3 coilover suspension gives your car maximum performance for the road and equips you for any challenge.

The ST XTA plus 3 coilover suspension comes from the factory with KW dampers that are adjustable in low and high-speed compression and rebound. With 24 clicks each in the compression stage (low and high speed) and 16 clicks in the low speed rebound stage, you can take any performance modification to your project vehicle into account. Whether a retrofitted roll bar, welded-in safety cell, change to PU bushes and modified wheel loads, the ST XTA plus 3 coilover suspension takes on any challenge. Of course, the ST XTA plus 3 coilover suspension also comes with racing springs and aluminum Unibal support bearings and a parts certificate.

Simple variation of the lowering
As with all ST coilover suspensions, the lowering is infinitely adjustable via the coilover spring plate. Like KW, ST Suspensions also uses a polyamide adjustable spring plate, which allows the lowering to be easily adjusted via the trapezoidal thread on the galvanized spring strut. The lowering can also be changed in the installed state by simply turning the adjustable spring plate higher or lower. If the car has a non-wheel-bearing double wishbone suspension on the rear axle, the lowering can be adjusted using the ST Suspensions rear axle height adjustment. Please note: the lowering is different for each vehicle depending on its design.

KW Engineering: exclusively for ST Suspensions
The high-quality ST XTA plus 3 coilovers are based on the twin-tube damping principle in low-friction and pressure-resistant damper housings. The dampers are manufactured directly at KW. A monoblock guide and seal package reduces friction in the damper when the chrome-plated piston rod moves in and out. In addition, optimum corrosion protection and multiple sealing of the galvanized spring strut ensure long driving pleasure with the ST XTA plus 3 coilovers.

- Latest damping technology for a long service life
- Reduced system friction for effective damping adjustment
- Individual lowering within the tested adjustment range
- VA and HA (if technically possible) with threaded adjustment
- Galvanized coilover struts with additional sealing for optimized corrosion protection
- Complete solution with adjustable spring plate, spring system and stop elements with dust protection system
- Aluminum Unibal support bearing (adjustable if technically possible)
- Scaled camber adjustment, if technically possible
- 3-way adjustable damper:
18 clicks low-speed rebound
24 clicks low-speed compression
24 clicks high-speed compression

These parts are motorsport products which are not readily approved according to the German Road Traffic Regulations (StVO). An individual approval according to §21 by the TÜV is necessary. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of product identification and their allocation to the appropriate vehicle type.