PRODUCT VIEW
Brake cooling outlet suitable for BMW E92 M3
Brake cooling outlet suitable for BMW E92 M3
Lieferzeit: 3-5 Werktage
Documents
Instructions/Manual
From: 179,00 €
incl. 19 % VAT plus shipping costs
Product information
"Our part has to work and have a technical advantage in addition to its appearance, otherwise we won't build it." - Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
In many vehicles, such as the E92 M3, brake cooling is recommended even for medium loads, even off the racetrack. This not only improves braking performance, but also drastically reduces wear on the friction partners.
Our armature plate uses the channeling of the air flow to the center of the brake disc to utilize the turbine effect to cool the disc from the inside. In doing so, we direct the airflow at the disc at a defined angle in order to avoid any scattering losses and make maximum efficient use of the available air volume. Thanks to the lightweight design in combination with powder-coated aluminum, the armature plate is sufficiently strong and at the same time light and robust. In addition, the bearings closest to the brake disk are shielded from the heat to increase their service life. Thanks to the choice of powder-coated aluminum as a material, the component is sufficiently strong and at the same time light and insensitive.
Included in the scope of delivery:
- 1x anchor plate for the front axle 1x left
- 1x anchor plate for the front axle 1x right
Air hose not included in the scope of delivery, this is available in our store, as are the matching hose clamps:
Hose clamp Torro 40-60/12 C7W2
The anchor plate fits plug & play and no additional fastening material is required. The original fixing points and screws can be reused.
Article is suitable for
- E92 M3
- E82 1 Series M
Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle brands and models is only for the purpose of product identification and their allocation to the appropriate vehicle type.
The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it becomes impossible for us to cover all variants. In the worst case scenario, the wheel could rest slightly on the ground at full steering lock (which should only be the case when parking), which may not cause any damage to the tire. In this case, we would ask you to refrain from the last ¼ of the steering turns.
Lieferzeit: 3-5 Werktage
Documents
Instructions/Manual
General FAQs
Are you missing parts that are supposed to be present according to the delivery bill?
1. write us an email to lager@speedengineering.de with the following content: first name, last name - order number - missing item number.
We will contact you immediately for a free reshipment.
2. use our chat at the defined times and communicate the same data as in the email.
The package has not arrived within the specified delivery time?
In most cases, you will receive a notification from the shipping service provider after the status of your order has changed, including a tracking number. You can use this tracking number to track your parcel and contact the service provider. Please note that the status "Shipment is ready for collection or has been announced" only indicates that your parcel is ready for collection by the parcel service provider and is NOT yet on its way. This message can often persist over weekends or after 5 p.m. until the next working day. In this case, it is not necessary to contact us as the parcel is not yet on its way.
Can I have products installed?
Yes, all products where this is possible have the sub-item
"Castrop-Rauxel workshop - installation fee 0.5 hours"
Click on it and the additional price will be displayed directly. Place the main item in the shopping cart, complete the purchase and you have already booked the installation. We will contact you by email within the next 48 hours to arrange an appointment for installation. Don't worry, your parts will not be shipped in this case unless you want them to be.
Where can I find the installation instructions?
As a rule, you will find all available installation instructions in written form after purchase in a download link which is only valid for you. But beware, not all products have written installation instructions. We are constantly working on providing these for all products, but unfortunately this step is very time-consuming and takes time.
If you get stuck, please send an email to info@speedengineering with the following data in the subject line:
First name, last name - Order number - Request for installation instructions
Or use our chat. They will also be able to help you there.
Last but not least, many video instructions are available at:
https://www.youtube.com/@-manuals-speedengineering4200
Where can I find my parts certificate or material certificate?
Parts certificates or material certificates are only provided after the purchase has been completed. Either by download link or by email. Unfortunately, these documents cannot be sent in advance.
Partial appraisals will of course be sent with your package in physical form, if applicable.
I have a defective part?
You have already bought products from us and they are worn out or have been affected by other circumstances? No problem, we adhere to all legal requirements of warranty and guarantee claims and beyond.
Please send us an e-mail to order@speedengineering.de with the following details:
Name, surname - Order number - Item number which appears to be defective - Image file of the item (if possible)
We will get back to you within 48 hours to solve the problem.
Similar products
-
Brake cooling rear axle suitable for BMW F and G series M G8x F8x M2 M3 M4
From: 240,00 € -
Brake cooling inlet suitable for Ford Mustang GT FL CS
From: 249,00 € -
Brake cooling system suitable for BMW M2 M3 M4 G87/G80/82 TRACK - complete set
From: 440,00 € -
Brake cooling inlet suitable for Ford Mustang GT FL Track
From: 249,00 €
Only registered customers who have purchased this product may leave a review.
powered by
Reviews