Bremsenkühlung passend für BMW M2 M3 M4 G87/G80/81/82 TRACK – Komplettset

"Our part has to work and have a technical advantage in addition to its appearance, otherwise we won't build it." - Speed Engineering GmbH

All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!

This is the track set for ambitious drivers who like to drive their vehicle on the racetrack. You can find the Clubsport set as a simpler version with slightly lower efficiency, but even easier and tool-free installation under the following link: Clubsport brake cooling

For the more ambitious among you: Both cooling systems can be combined!

Air duct inlet:

In order to transport the air to the brake ventilation outlet, a suitable inlet is essential. The G80/82 M3/M4 (as well as the Competition) already has factory inlet ducts in the front bumper, but these end in the middle of the wheel arch. To prevent the air from swirling randomly in the wheel arch, we have developed an inlet duct which can be fitted with minimal effort and connects the air to the outlet by means of a hose around the wheel. No fixing tools are required for installation. It is fitted in place of the original duct connector. The duct is based on the OEM duct and therefore uses exactly the same connection points and is therefore 100% retrofittable without leaving any residue.

Air duct outlet:

In many vehicles, brake cooling is already recommended for medium loads, even off the racetrack. This not only improves braking performance, but also drastically reduces wear on the friction partners. Our anchor plate uses the channeling of the air flow to the center of the brake disc to utilize the turbine effect to cool the disc from the inside. In doing so, we direct the airflow at the disc at a defined angle in order to avoid scattering losses and make maximum efficient use of the available air volume. Thanks to the lightweight design in combination with powder-coated aluminum, the armature plate is sufficiently strong and at the same time light and robust. In addition, the bearings closest to the brake disk are shielded from the heat in order to increase their service life (if necessary).

Included in the scope of delivery:

• 1x air duct inlet left
• 1x air duct inlet right
• 1x Anchor plate left
• 1x anchor plate right
• 2x air hose (2 meters)
• 4x hose clamps

Article is suitable for

• BMW M4 G82
• BMW M3 G80
• BMW M2 G87

Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle brands and models is only for the purpose of product identification and their allocation to the appropriate vehicle type.

The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it becomes impossible for us to cover all variants. In the worst case scenario, the wheel could rest slightly on the ground at full steering lock (which should only be the case when parking), which may not cause any damage to the tire. In this case, we would ask you to refrain from the last ¼ of the steering turns.