PRODUCT VIEW
Brake cooling system suitable for BMW E46 M3 complete set
Brake cooling system suitable for E46 M3 complete set
Expected delivery time: 14-28 working days
From: 339,00 €
incl. 19 % VAT plus shipping costs
Product information
"Our part has to work and have a technical advantage in addition to its appearance, otherwise we won't build it." - Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
Air duct inlet:
In order to transport the air to the brake ventilation outlet, a suitable inlet is essential. The E46 M3 already has inlet ducts in the front bumper ex works, but these end in the middle of the wheel arch. To prevent the air from swirling randomly in the wheel arch, we have developed an extension to the air duct which can be fitted with minimal effort, guides the air around the wheel and connects the air duct to our anchor plate via a 40 cm long hose (per side).
Air duct outlet (anchor plate):
The right anchor plates for the E46 M3! We use the channeling of the air flow to the center of the brake disc to utilize the turbine effect to cool the disc from the inside. In doing so, we direct the airflow at the disc at an angle that reduces scattering losses and makes maximum efficient use of the available air volume. In addition, the bearings closest to the brake disk are shielded from the heat to increase their service life (only if necessary). Thanks to the choice of powdered aluminum material, the component is sufficiently strong and at the same time light and insensitive.
IMPORTANT: The different models vary slightly in wheel position. Coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to damage to the tire. In this case, we would ask you to refrain from the last ¼ of the steering turns.
Included in the scope of delivery:
1x air duct inlet for the front axle left
1x air duct inlet for the front axle right
8x fixing screw with washer
1x Anchor plate for the front axle left
1x anchor plate for the front axle on the right
1x air hose (1 meter)
4x hose clamps
Article is suitable for:
BMW E46 M3
These parts are motorsport products which are not readily approved according to the German Road Traffic Regulations (StVO). An individual approval according to §21 by the TÜV is necessary. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of product identification and their allocation to the appropriate vehicle type.
Expected delivery time: 14-28 working days
General FAQs
Are you missing parts that are supposed to be present according to the delivery bill?
1. write us an email to lager@speedengineering.de with the following content: first name, last name - order number - missing item number.
We will contact you immediately for a free reshipment.
2. use our chat at the defined times and communicate the same data as in the email.
The package has not arrived within the specified delivery time?
In most cases, you will receive a notification from the shipping service provider after the status of your order has changed, including a tracking number. You can use this tracking number to track your parcel and contact the service provider. Please note that the status "Shipment is ready for collection or has been announced" only indicates that your parcel is ready for collection by the parcel service provider and is NOT yet on its way. This message can often persist over weekends or after 5 p.m. until the next working day. In this case, it is not necessary to contact us as the parcel is not yet on its way.
Can I have products installed?
Yes, all products where this is possible have the sub-item
"Castrop-Rauxel workshop - installation fee 0.5 hours"
Click on it and the additional price will be displayed directly. Place the main item in the shopping cart, complete the purchase and you have already booked the installation. We will contact you by email within the next 48 hours to arrange an appointment for installation. Don't worry, your parts will not be shipped in this case unless you want them to be.
Where can I find the installation instructions?
As a rule, you will find all available installation instructions in written form after purchase in a download link which is only valid for you. But beware, not all products have written installation instructions. We are constantly working on providing these for all products, but unfortunately this step is very time-consuming and takes time.
If you get stuck, please send an email to info@speedengineering with the following data in the subject line:
First name, last name - Order number - Request for installation instructions
Or use our chat. They will also be able to help you there.
Last but not least, many video instructions are available at:
https://www.youtube.com/@-manuals-speedengineering4200
Where can I find my parts certificate or material certificate?
Parts certificates or material certificates are only provided after the purchase has been completed. Either by download link or by email. Unfortunately, these documents cannot be sent in advance.
Partial appraisals will of course be sent with your package in physical form, if applicable.
I have a defective part?
You have already bought products from us and they are worn out or have been affected by other circumstances? No problem, we adhere to all legal requirements of warranty and guarantee claims and beyond.
Please send us an e-mail to order@speedengineering.de with the following details:
Name, surname - Order number - Item number which appears to be defective - Image file of the item (if possible)
We will get back to you within 48 hours to solve the problem.
Only registered customers who have purchased this product may leave a review.
powered by
Reviews