PRODUCT VIEW
Brake cooling system suitable for Toyota Supra MK5 Gen.2
Brake cooling system suitable for Toyota Supra MK5
Expected delivery time: 14-28 working days
From: 380,00 €
incl. 19 % VAT.
Additional information
| Vehicle manufacturer | |
|---|---|
| Vehicle type | |
| Axis | Front axle |
Braided steel brake hose set suitable for Toyota Supra MK5 258 PS VA +HA
| Vehicle manufacturer | Toyota |
|---|---|
| Model | SUPRA MK5 |
Braided steel brake hose set suitable for Toyota Supra MK5 340 hp VA + HA
| Vehicle manufacturer | Toyota |
|---|---|
| Model | SUPRA MK5 |
ENDLESS brake pads suitable for BMW G Series M Brake G29 Z4, Toyota Supra MK5, G20 M340i, G30 G31 530
| Vehicle manufacturer | |
|---|---|
| Vehicle type | |
| Axis | Rear axle, front axle |
| Coating mixture | MX87, N39S |
Product information
"Our part has to work and have a technical advantage in addition to its appearance, otherwise we won't build it." - Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
New generation! We have revised and improved our parts to create more space for the rim!
Do you want maximum performance?
At the front you can upgrade your cooling twice with our Clubsport cooling, in addition to your cooling: https://www.speedengineering.de/produkt/bremsenkuehlung-bmw-m2-g87-m3-g80-und-m4-g82-va-set/
Don't forget the rear axle: https://www.speedengineering.de/produkt/bremsenkuehlung-passend-fuer-bmw-f20-toyota-supra-mk5/
Air duct inlet:
In order to transport the air to the brake ventilation outlet, a suitable inlet is essential. The Supra has an air duct in the wheel arch in front of the wheel, through which the air is to be directed into the wheel arch. To prevent the air from swirling randomly in the wheel arch, we have developed an extension to the air duct which can be fitted with minimal effort, guides the air around the wheel and connects the air duct to our outlet via a hose (on each side). On some models, a small piece of the wheel arch liner has to be cut out to create space for the duct so that it can be fitted without tension.
Air duct outlet:
Here too, the brake disk must be supplied with air as centrally as possible. The brake disk of the Supra has a very small pot, so we refrained from developing a classic anchor plate. However, in order to make use of the turbine effect of the brake disc, we have developed a brake cooling system which is mounted on the wheel carrier and flows air to the center of the disc regardless of the wheel position. It is simply attached using existing screw-on points and without any permanent changes to the vehicle. A major advantage over a new anchor plate: regardless of the wheel position, the system does not pivot. This means that the hose is not under permanent load and we have the option of transporting the air via a very short hose, thus reducing losses.
Included in the scope of delivery:
- 1x air duct inlet for the left front axle
- 1x air duct inlet for the right front axle
- 1x air duct outlet for the left front axle
- 1x air duct outlet for the right front axle
- 1x air hose (1 meter)
- 4x hose clamps
Article is suitable for
- Toyota Supra MK5
- BMW Z4 G29
Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle brands and models is only for the purpose of product identification and their allocation to the appropriate vehicle type.
The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it becomes impossible for us to cover all variants. In the worst case scenario, the wheel could rest slightly on the ground at full steering lock (which should only be the case when parking), which may not cause any damage to the tire. In this case, we would ask you to refrain from the last ¼ of the steering turns.
Want to find out more about the product? Then watch the video:
Expected delivery time: 14-28 working days
General FAQs
Are you missing parts that are supposed to be present according to the delivery bill?
1. write us an email to lager@speedengineering.de with the following content: first name, last name - order number - missing item number.
We will contact you immediately for a free reshipment.
2. use our chat at the defined times and communicate the same data as in the email.
The package has not arrived within the specified delivery time?
In most cases, you will receive a notification from the shipping service provider after the status of your order has changed, including a tracking number. You can use this tracking number to track your parcel and contact the service provider. Please note that the status "Shipment is ready for collection or has been announced" only indicates that your parcel is ready for collection by the parcel service provider and is NOT yet on its way. This message can often persist over weekends or after 5 p.m. until the next working day. In this case, it is not necessary to contact us as the parcel is not yet on its way.
Can I have products installed?
Yes, all products where this is possible have the sub-item
"Castrop-Rauxel workshop - installation fee 0.5 hours"
Click on it and the additional price will be displayed directly. Place the main item in the shopping cart, complete the purchase and you have already booked the installation. We will contact you by email within the next 48 hours to arrange an appointment for installation. Don't worry, your parts will not be shipped in this case unless you want them to be.
Where can I find the installation instructions?
As a rule, you will find all available installation instructions in written form after purchase in a download link which is only valid for you. But beware, not all products have written installation instructions. We are constantly working on providing these for all products, but unfortunately this step is very time-consuming and takes time.
If you get stuck, please send an email to info@speedengineering with the following data in the subject line:
First name, last name - Order number - Request for installation instructions
Or use our chat. They will also be able to help you there.
Last but not least, many video instructions are available at:
https://www.youtube.com/@-manuals-speedengineering4200
Where can I find my parts certificate or material certificate?
Parts certificates or material certificates are only provided after the purchase has been completed. Either by download link or by email. Unfortunately, these documents cannot be sent in advance.
Partial appraisals will of course be sent with your package in physical form, if applicable.
I have a defective part?
You have already bought products from us and they are worn out or have been affected by other circumstances? No problem, we adhere to all legal requirements of warranty and guarantee claims and beyond.
Please send us an e-mail to order@speedengineering.de with the following details:
Name, surname - Order number - Item number which appears to be defective - Image file of the item (if possible)
We will get back to you within 48 hours to solve the problem.
Only registered customers who have purchased this product may leave a review.
powered by
Reviews