PRODUCT VIEW
Universal hood vent for the hood
Universal hood vent for the hood
Lieferzeit: 3-5 Werktage
Product Documents
Product documents
From: 119,57 €
incl. 19 % VAT.
Product information
"Our part has to work and have a technical advantage in addition to its appearance, otherwise we won't build it." - Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
From motorsport, for the road.
The universal solution for most vehicles!
In addition to the racing look, this component has very important functions
- Reducing the temperature in the engine compartment.
- Lowering the lift on the front axle.
Re 2: The air flows through the radiator and collects in the engine compartment. This creates excess pressure which, among other things, exerts a force on the hood and relieves the front axle and generates lift. Furthermore, the air usually escapes via the partially open underbody of the vehicle. The higher the air volume under the vehicle, the more the lift is promoted here too.
The air vents allow the air to escape via the hood and thus reduce the overpressure in the engine compartment. Here is a small excerpt from our simulation model:
Our vehicles were fitted with temperature sensors at several points in the engine compartment:
Measurement runs were then carried out and the results are reflected in the following diagram:
The orange curve describes the system with venting and the blue curve without venting. At first glance, the results seem confusing, as the temperature appears to be higher without venting. However, this is exactly the result we wanted to see:
The sensors were positioned in the upper area of the engine compartment and you can see that the hot air now does not take the route via the underbody, but instead passes the sensors at the top to the ventilation system, so that it flows over the vehicle. Direct hit!
Wichtig: Das Material kann die UV Beständigkeit bei extremen und häufigen Hitzezyklen verlieren. In solchen Fällen empfehlen wir das Bauteil einfach schwarz zu lackieren und die UV Resistenz somit dauerhaft zu gewährleisten.
We have successfully tested the accuracy of fit on the following vehicles
- BMW M2
- BMW F20,21,22
- Hyundai i30n
- Hyundai i20n
- Toyota Supra MK5
- Toyota GR86
- Toyota GT86
- Toyota GR Yaris
- BMW M3 F80 and M4 F82
- Ford Fiesta ST MK8
- Honda Civic Type R FK8
- and much more ...
Installation:
If the "installation flat rate" option has been purchased, only the installation time is displayed. The standing time at our location in Castrop-Rauxel is 2 full days so that the adhesive can harden for the TÜV approval.
Please note: Especially with foiled cars, the film can be damaged when cutting out! Of course we try to prevent this as much as possible, but this is not always possible!
Included in the scope of delivery:
- 1x Uni hood vent L
- 1x Uni hood vent R
- Cutting template and material certificate in the download link in the order confirmation
This article is suitable for
- Most common vehicles
Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle brands and models is only for the purpose of product identification and their allocation to the appropriate vehicle type.
Lieferzeit: 3-5 Werktage
Product Documents
Product documents
General FAQs
Are you missing parts that are supposed to be present according to the delivery bill?
1. write us an email to lager@speedengineering.de with the following content: first name, last name - order number - missing item number.
We will contact you immediately for a free reshipment.
2. use our chat at the defined times and communicate the same data as in the email.
The package has not arrived within the specified delivery time?
In most cases, you will receive a notification from the shipping service provider after the status of your order has changed, including a tracking number. You can use this tracking number to track your parcel and contact the service provider. Please note that the status "Shipment is ready for collection or has been announced" only indicates that your parcel is ready for collection by the parcel service provider and is NOT yet on its way. This message can often persist over weekends or after 5 p.m. until the next working day. In this case, it is not necessary to contact us as the parcel is not yet on its way.
Can I have products installed?
Yes, all products where this is possible have the sub-item
"Castrop-Rauxel workshop - installation fee 0.5 hours"
Click on it and the additional price will be displayed directly. Place the main item in the shopping cart, complete the purchase and you have already booked the installation. We will contact you by email within the next 48 hours to arrange an appointment for installation. Don't worry, your parts will not be shipped in this case unless you want them to be.
Where can I find the installation instructions?
As a rule, you will find all available installation instructions in written form after purchase in a download link which is only valid for you. But beware, not all products have written installation instructions. We are constantly working on providing these for all products, but unfortunately this step is very time-consuming and takes time.
If you get stuck, please send an email to info@speedengineering with the following data in the subject line:
First name, last name - Order number - Request for installation instructions
Or use our chat. They will also be able to help you there.
Last but not least, many video instructions are available at:
https://www.youtube.com/@-manuals-speedengineering4200
Where can I find my parts certificate or material certificate?
Parts certificates or material certificates are only provided after the purchase has been completed. Either by download link or by email. Unfortunately, these documents cannot be sent in advance.
Partial appraisals will of course be sent with your package in physical form, if applicable.
I have a defective part?
You have already bought products from us and they are worn out or have been affected by other circumstances? No problem, we adhere to all legal requirements of warranty and guarantee claims and beyond.
Please send us an e-mail to order@speedengineering.de with the following details:
Name, surname - Order number - Item number which appears to be defective - Image file of the item (if possible)
We will get back to you within 48 hours to solve the problem.
Only registered customers who have purchased this product may leave a review.
powered by
Reviews