Description
“Our part has to work and have a technical advantage in addition to its appearance, otherwise we won’t build it.” – Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
The optimum cooling for your pole, for a longer service life of your brake components!
Admission:
The track version of this cooling system takes cool air from the bumper and guides it to the corresponding anchor plate by means of an air hose. This variant is clearly recommended, as the Mustang GT, with its high rated power, has to decelerate as quickly as possible at enormous speeds and the heat development is therefore relatively high.
This also includes optimized deflection vanes for double cooling of the brake disc.
In this case, it is necessary to modify the existing bumper. The supplied counter plate also serves as a cutting template to create an opening in the plastic.
Outlet:
We use the channeling of the air flow to the center of the brake disc to use the turbine effect to cool the disc from the inside. In doing so, we direct the air at the pane at a defined angle in order to avoid scattering losses and make maximum efficient use of the available air volume.
The lightweight construction in combination with powder-coated aluminum makes the component sufficiently strong and at the same time light and robust.
The ball joint of your control arm is extremely close to the hot brake disk and will be affected in the long term. This anchor plate therefore provides additional shielding for the bearing, thereby increasing its durability.
Included in the scope of delivery:
- 2x air inlet duct (left and right)
- 2x counter plates (left and right)
- 6x fixing screws
- 3x air hose = 3 meters
- 2x upgrade air scoops (left and right)
- 2x anchor plates for the front axle 1x left 1x right with connection for 51 mm air hose
Article is suitable for
- Ford Mustang GT facelift from 2016
Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of finding products and assigning them to the appropriate vehicle type.
The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could come to rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to any damage to the tire. In this case, we would ask you to dispense with the last ¼ of the steering turns.
Reviews
There are no reviews yet.