Description
“Our part has to work and have a technical advantage in addition to its appearance, otherwise we won’t build it.” – Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
In order to transport the air to the outlet of the brake ventilation system, a suitable inlet is essential. The M3/M4 does not have factory inlet ducts in the front bumper like the M2 Competition, for example. What your car does have, however, are 2 radiators on the sides behind the bumper! So why not use the existing airflow efficiently?
To prevent the air after the radiators from swirling randomly in the wheel arch, we have developed a guide channel that can be fitted with minimal effort and guides the air around the wheel and connects a connection to the outlet via a 40 cm long hose (per side). Our tests have shown that no significant back pressure builds up behind the radiator and in the event of extreme speeds and increasing pressure, the channels do not present any obstacles to the escaping air behind the radiator.
This article is also available in a kit with the matching diffusers in the store.
IMPORTANT: The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could come to rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to any damage to the tire. In this case, we would ask you to dispense with the last ¼ of the steering turns.
Included in the scope of delivery:
1x air duct inlet left
1x air duct inlet right
6x fixing screw
6x washer
The matching hose (Art.: 13181) and the matching hose clamps (Art.: 13187) are also available in the store.
This article is suitable for
BMW F80 M3
BMW F82 M4
These parts are motorsport products which are not readily approved according to the German Road Traffic Regulations (StVO). An individual approval according to §21 by the TÜV is necessary for this. We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of finding products and assigning them to the appropriate vehicle type.
Reviews
There are no reviews yet.