Brake cooling inlet suitable for BMW M3/4 G80/82

Description

Air duct inlet:

In order to transport the air to the outlet of the brake ventilation system, a suitable inlet is essential. The G80/82 M3/M4 (as well as the Competition) already has factory inlet ducts in the front bumper, but these end in the middle of the wheel arch. To prevent the air from swirling randomly in the wheel arch, we have developed an inlet duct that can be fitted with minimal effort and connects the air to the outlet by means of a hose around the wheel. No fixing tools are required for installation. It is replaced with the original duct connector. The duct is based on the OEM duct and therefore uses exactly the same connection points and is therefore 100% retrofittable without leaving any residue.

A complete kit for this vehicle incl. of the anchor plates is also available here in the store.

Installation instructions:

Included in the scope of delivery:

• 1x air duct inlet right
• 1x Anchor plate left
• 1x anchor plate right
• 2x air hose (2 meters)
• 4x hose clamps

Article is suitable for

• BMW M3 G80
• BMW M4 G82

Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of finding products and assigning them to the appropriate vehicle type.

The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could come to rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to any damage to the tire. In this case, we would ask you to dispense with the last ¼ of the steering turns.