Description
“Our part has to work and have a technical advantage in addition to its appearance, otherwise we won’t build it.” – Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
On our racing cars, we noticed that the inside of the brake disk (despite the brake upgrade) builds up extreme temperatures on the rear axle. Apart from the excessive temperature development, an extreme difference between the inner and outer side leads to an uneven wear pattern of the brake pads.
Our solution works plug & play and does not require any adjustments to the vehicle, no installation of a hose, clamps or other accessories makes the system wear-free. We use the original screw points on the wishbone. The air is fed directly into the inside of the rim via a flow channel.
Removal of the anchor plate is strongly recommended!
Included in the scope of delivery:
- 1x air duct left
- 1x air duct right
This article is suitable for
- BMW E82
- BMW E88
Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of finding products and assigning them to the appropriate vehicle type.
The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could come to rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to any damage to the tire. In this case, we would ask you to dispense with the last ¼ of the steering turns.
Reviews
There are no reviews yet.