Brake cooling system suitable for Fiat Abarth complete set

Description

With this kit, we have found a way to cool the brakes of the Fiat Abarth as efficiently as possible, using a wear-free hose assembly.

The wheel position has no influence on the movement of the hose. The most efficient way to tap the maximum volume flow for this is and remains at the front of the vehicle. We also use this for the Abarth by developing Plug&Play funnels for the side openings of the bumper. The inlets have the right curvature for collision-free hose installation.

Outlet: Here too, the brake disk must be supplied with air as centrally as possible. The brake disk of the Abarth does not have a large pot. A classic solution using an armature plate would therefore result in the inner surface of the friction disk being cooled on one side. However, in order to utilize the turbine effect of the brake disc, we have developed a brake cooling system that is mounted on the wishbone and flows to the center of the disc regardless of the wheel position. They are simply attached using existing locking pins and without any permanent changes to the vehicle.

Included in the scope of delivery:

• 1x air duct outlet left
• 1x air duct outlet right
• 1x air duct inlet left
• 1x air duct inlet right
• 1x hose (1 meter)
• 4x mounting clamps

Article is suitable for

• Fiat Abarth

Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of finding products and assigning them to the appropriate vehicle type.

The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could come to rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to any damage to the tire. In this case, we would ask you to dispense with the last ¼ of the steering turns.