Description
“Our part has to work and have a technical advantage in addition to its appearance, otherwise we won’t build it.” – Speed Engineering GmbH
All parts were not only developed but also manufactured in Germany and are therefore 100% Made in Germany!
On our racing cars, we noticed that the inside of the brake disk on the rear axle gets extremely hot (despite the brake upgrade). Apart from the excessive temperature development, an extreme difference between the inner and outer side leads to an uneven wear pattern of the brake pads. Our solution is plug & play and requires no modifications to the vehicle, no installation of a hose, clamps or other accessories. The air is fed directly to the inside of the brake disk via an air duct. In order to increase the air volume, we work with another duct system to convey additional cool air flowing under the vehicle through the negative pressure in the duct.
Only when the anchor plate is removed does it make sense to use our system!
Included in the scope of delivery:
- 1x air duct left
- 1x air duct right
Article is suitable for
- BMW E92 M3
Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of vehicle makes and models is only for the purpose of finding products and assigning them to the appropriate vehicle type.
The different models vary slightly in wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case scenario, the wheel could come to rest slightly on the ground at full steering lock (which should only be the case when parking), which cannot lead to any damage to the tire. In this case, we would ask you to dispense with the last ¼ of the steering turns.
Reviews
There are no reviews yet.